Avocent DSView Installer/User Manual Download

Page: 252 / 358

234

DSView Installer/User Guide

•

Appliance - The name of the managed appliance.

•

User/User Group - The user or user group to which the managed appliance has any or all rights
for the unit.

•

Reboot - Whether the user or user group may reboot the managed appliance.

•

Flash Upgrade - Whether the user or user group may Flash upgrade the managed appliance.

•

Settings - Whether the user or user group may configure appliance settings, not including the
right to manage local user accounts on the appliance.

•

Local Users - Whether the user or user group may manage local users on the managed
appliance

The following information will be exported for target devices:

•

Target Device - Name of the target device.

•

User/User Group - User or user group to which managed appliances have any or all rights for
the target device.

•

Viewer Sessions - Whether the user or user group may launch a KVM or serial session with the
target device.

•

Power Control - Whether the user or user group may perform power control operations on the
target device.

•

VM Sessions - Whether the user or user group may launch a virtual media session with the
target device.

•

Reserved VM Sessions - Whether the user or user group may launch a reserved virtual media
session with the target device

The output .csv file may be viewed in a text editor or spreadsheet application, such as
Microsoft Excel.

To export unit rights:

From the Units Tools window, click the

Export Unit Rights

icon or link. The Export Unit

Rights Wizard will appear. Click

Next

The Select Unit Type window will open.

Select

Appliances

to export the rights for managed appliances in your DSView

software system.

-or-

Select

Target Devices

to export the rights for target devices in your DSView

software system.

Click

Next

The Save Process window will open. Click

Next

The Completed Successful window will open, along with a File Download dialog box.

Summary of Contents for DSView







































































































































































































































































































































































Search results

Summary of Contents for DSView

Reviews:

Related manuals for DSView

Brands by name

Popular brands

Avocent DSView, Installer/User Manual

Search results

Summary of Contents for DSView

Reviews:

Related manuals for DSView

Brands by name

Popular brands