8/16 PS/2 KVM over IP switch
39
The PS/2 IP-KVM switch comes with 2 pre-configured user accounts that have fixed
permissions. The account super has all possible rights to configure the device and to use all
functions PS/2 IP-KVM switch offers. The account “user” has only the permission to open
and use the Remote Console. Even his user name and password can only be changed by
the super account.
Upon delivery, both accounts have the password pass. Make sure to change these
passwords immediately after you have installed and firstly accessed your PS/2 IP-KVM
switch.
While the “user” account never sees the following options, the user “super” account can
change the name and password for both accounts.
Existing users
Select an existing user for modification. Once a user has been selected, click the lookup
button to see the user information.
New User name
The new user name for the selected account.
Password
The password for the login name. It must be at least four characters long.
Confirm password
Confirmation of the password above.
6.3 KVM Settings
6.3.1 User Console
The following settings are user specific. That means, the super user can customize these
settings for every users separately. Changing the settings for one user does not affect the
settings for the other users.
Figure 6-14. User Console Settings (Part 1)
