58
MergePoint 5200 Service Processor Manager Installer/User Guide
Appendix D: How To Configure Virtual Serial Port
MergePoint 5200 service processor managers have the ability to access target devices with iLO
through the Virtual Serial port. To use this feature, you must enable the Virtual Serial port on both
the BIOS Serial Console and EMC Console. When Virtual Serial Port is enabled, it provides
remote access through the iLO management controller to the BIOS Serial Console.
To configure BIOS Serial Console:
1.
Enter ROM-Based Setup Utility by pressing
F9
during power up or system reset.
2.
Select
BIOS Serial Console and EMS
on the main menu.
3.
Press
Enter
to display the options.
4.
Select
BIOS Serial Console Port
on the options.
5.
Press
Enter
to display the options of BIOS Serial Console Port.
6.
Select
Com1
or
Com2
as the BIOS Serial Console Port.
7.
Press
Enter
to save the selection.
To configure EMC Console:
1.
Enter ROM-Based Setup Utility by pressing
F9
during power up or system reset.
2.
Select
BIOS Serial Console and EMS
on the main menu.
3.
Press
Enter
to display the options.
4.
Select
EMC Console
on the options.
5.
Press
Enter
to display the options of EMC Console.
6.
Select the same port that you selected for the BIOS Serial Console Port.
7.
Press
Enter
to save the selection.
Summary of Contents for MergePoint 5200
