background image

AVOCET 1-YEAR LIMITED WARRANTY

This Avocet Cyclometer is warranted against defects in material ind workmanship for one year after date of purchase,
or two years after the manufacture date stamped on the PC board under the battery (YM), whichever comes first.
Defective products will be repaired or replaced. The warranty will not cover the battery, normal wear, damage, or loss
and is void if the Cyclometer is disassembled by anyone other than an authorized Avocet Service Center.

PROCESSING INFORMATION

Customer service and product information are available at www.avocet.com/service.html or by calling 

650-470-0478

.

Warranty claims are to be sent to the Service Center by the owner, not by  the retail store where the Cyclometer was
purchased. Include a description of the problem. Only the original, dated cash register or charge card receipt will be
accepted for proof of purchase date (no exceptions).

Send your Cyclometer freight prepaid to the Service Center at the address listed below. A traceable method of shipment
is recommended in the event that your shipment to Avocet is lost in transit.

Avocet Service Center

170A University Ave

Palo Alto, CA 

9

4301

Customer service and product information are available at www.avocet.com or by calling 

650-470-0478 ext 218

AVOCET, INC, P.O. Box 180, Palo Alto, CA 94302, USA

0

4

02

CYCLOMETER 45tt

Summary of Contents for 45tt













Reviews: