SPECIFIC
A
TIONS
PART IV–INSTALLATION–GEAR/CADENCE
1
. TRANSMITTER.
Remove the rear
wheel. Place the transmitter on the hub flange
with its magnet facing out. Thread a cable tie
through every third slot on the transmitter if
your wheel has 32 spokes (4 ties) and every
fourth slot if it has 36 spokes (3 ties). Attach
the ties to spoke crossings. Center the ring while
gradually tightening the ties. Trim the tie ends
and reinstall the wheel.
2. RECEIVER.
Insert two cable ties in
the slots on the receiver holder. Place the
holder on the inside of the seat stay or chain
stay and align the receiver with the transmit-
ter. Tighten the ties and trim their ends. Slide
the receiver in its holder until it nearly touches
the transmitter.
Seat stay
Receiver holder
Receiver
Transmitter
GEAR/C
ADENCE MOUNT
-STEPS 1 & 2
16
Setup functions
Miles/Kilometers: Stored data converted when setup is changed.
Displays gear development in cm when setup for km
Total Distance Setup: Total distance programmable by the user
Wheel Size Calibration: Calibration for wheels from 30.24"
circumference to 130.99" circumference in 0.04" increments
Sleep: Cuts power consumption by 50% while retaining stored
data
Dimensions:
1.75" X 1.75" x 0.3"
Weight:
Unit, 0.5 oz
Display:
Dual liquid crystal, UPPER NUMBERS 0.3" high;
lower numbers 0.2 high
Operational Temperature Range:
0
°
F to 150
°
F
Data:
Speed display updated every second. MultiPulse
transmitter sends 20 pulses per wheel revolution
Weather resistance:
Water resistant
Mount System:
Compatible with all Avocet computers except
models 15 and 25
Battery:
1.5 volt, 2 year life. Use Avocet Cyclometer
4
5 battery or
357 (Renata, Eveready, RayOVac, Phillips). SR44W (Maxell,
National, Panasonic, Sony, Toshiba), D357H (Duracell).
Accessories
:
Cadence mount kit to add gear/cadence (if your package is
marked ‘Gear/Cadence’, you already have this kit)
Rear mount kit for use with trainers that keep the front wheel
stationary
Instrument displays either miles or kilometers. Functions can be reset
individually or globally
Speed Functions
SPEED: To 400.0 mph in 0.1 mph increments
Maximum speed: To 400.0 mph in 0.1 increments (resettable)
Average Speed: To 199.99 mph in 0.01 increments. Calculated only
while the wheel is turning. Averages up to 250 hours (resettable)
Pace Arrow. Indicates whether current speed is above or below
average speed. Displayed in all functions
Cadence: From 15 to 250 rpm. Requires cadence mount kit included
in packages marked ‘Gear/Cadence’; available separately for others
Gear-Inch: From 20 to 200. Requires cadence mount kit
Distance Functions
TRIP DISTANCE: To 999.99 mi in 0.01 mi increments and from
1,000.0 to 1,999.9 in 0.1 increments (resettable). Display freezes at
1999.9 mi
Total Distance: To 19,999 mi in 1 mi increments. Display freezes at
19,999 mi
Riding Distance: To 999.99 mi in 0.01 mi increments and from 1,000.0
to 1,999.9 in 0.1 increments (distance used to compute average
speed)
Destination Distance. Distances up to 199.99 mi can be entered and
count down after the function is turned on
Time Functions
TIMER: To 9:59:59 in 1 second increments
Clock: To 1 minute; 12 or 24 hour format
Riding Time: To 9:59:59 (time used to compute average speed)
Destination Time: To 9:59:59. Only accumulates when Destination
Distance is turned on and the wheel is turning
15
Tie
Spoke
crossing
Magnet
