10
User instructions
ll
Bluetooth status table
‘BT’ state
Reason
‘BT’ solid (no
fl
ash)
•
Connected
‘BT’
fl
ash
•
Auto re-connecting with last
paired device.
•
Pairing mode
Controlling a paired device
Once connected you can either use the controls on the
audio device to begin playback, skip tracks etc.Or you can
use the control buttons on the sound bar & remote.
1:
The
PLAY/PAUSE
button
(3
or
21)
when pressed wi
begin playback of the selected track on the audio devic
Press again to pause playback.
2:
To skip to the next track press the
SKIP
button
(4
or
31).
3:
To skip to the previous track press the
SKIP
button
(4
or
24)
.
4:
Any further operations must be done from the audio
device.
NOTE: the volume output is effected by the
volume level on the audio source EG: Phone or
laptop, so make sure that is set to about 70-80% (
not too loud to avoid distortion).
Bluetooth notes
•
The operation range of bluetooth is approximately 10
meters (30 Feet). Any obstacles in the path between
devices may reduce this range.
•
Only one Bluetooth device can be paired at a time.
•
Not all Bluetooth devices are compatible.
Play aduio from USB storage devices
2. Press
SOURCE
button (
2
Unit or
22
Remote)
repeatedly until USB text appears on display.
3. Select a file you want to play.
1. Connect a USB storage device to the sound bar.
Playback
Pause
Skip to the next/
previous file
Play repeatedly
or randomly
D
(
4
or
24
,
31
) to go to the next file or
uring playback, press or
Press (
Option)
(
26
on remote)
repeatedly, the display will be
changed in the following order :
(repeat)
→
(repeat all)
→
(random)
→
(normal).
Press (
3
Unit or
21
Remote).
During playback, press .
To
Do this
Note:
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
● A USB storage device that is formatted for FAT
file systems, and complies with the Mass Storage
Class.
● An MP3 or WMA file on a USB storage
device
to step back to the previous file.
• This product may not be compatible with certain types
of
USB storage device.
• If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be recognized.
• Digital camera PTP protocols are not supported.
•
Do not remove the USB storage device while it is being read.
• DRM-protected music files (MP3, WMA) are not suppor
ted.
• Support a USB port: 5V , 1A.
-1
4:
Select and enable pairing for the
‘AS6000BW’
device.
I
f prompted for a password enter
‘0000’
.
5:
I
f pairing is successful the sound bar will beep and
the
‘BT’
text will stop
fl
ashing.
6:
I
f the connected device goes out of range, the
sound bar will attempt to connect for
2
minutes.
W
hen the device comes into range the sound bar
will reconnect again automatically.
7:
To remove the paired device using only the sound bar,
press and hold the
OPTION
button
(26)
on the remote
control. The
‘BT’
text will begin
fl
ashing again.
Pairing a Bluetooth device