6
Operating Instructions
1. Powering up and Initialization of the AV-REC200
Connect the supplied power transformer to the unit and wait until it is booted up . This process takes
approximately 35 seconds to 1 minute to complete . All of the features of the AV-REC200 can be acces-
sed through the webinterface, in the now following part of this manual we will explain how to use it .
2.1 Operating the webinterface
1 .
Connect the AV-REC200 directly to a pc or to a networkswitch .
2 .
The default ip address on which the AV-REC200 can be found is 192 .168 .1 .100 . Make sure that the
ip address of your computer has been put in the same subnet range of the AV-REC200
to be able to connect to it .
3 .
Open a webbrowser and enter the ip address of the AV-REC200 - the browser will connect to
the unit . Once the connection has been established, a login page will appear . The default user
name and password are admin/admin .
All of the features of the AV-REC200 can be accessed through the webinterface
Default IP address : 192.168.1.100
Default Username and Password : admin/admin
Image 3
