www.avonic.eu
Parameter
Description
Network Type
Manual settings:
Your network administrator assigns an IP address to your TE30. If you
select this option, you must also set Local IP address, Subnet mask, and
Gateway address.
When a DHCP server is available on the network, your TE30
automatically obtains an IP address using the Dynamic Host
Configuration Protocol (DHCP).
IP Address
network connections
Netmask
network connections
Gateway Address
network connections
DNS Address
network connections
Save button
Save the Internet ,Setting, Back to Internet Setting interface
Release button
Do not save the network settings, Back to Internet Setting interface
Set the Videoconferenceing camera name
1. Select “Settings” at the main interface, Enter the setup interface, Select “account” to enter account setup interface.
2. Select the "General" Configuration "terminal name", select "Save."
Setting H.323 Parameters (optional)
Setting CM55-VCT H323ID and number, specify GK address, so that the CM55-VCT is registered to GK, enabling
conference calls by number or other terminals.
1
．
Select “Settings” in the main interface, Select “Account , Enter Account Setup interface.
2
．
Select “H.323”,Press Home button, enter the interface to setting.
