www.avpsynth.com
SAVE button
Press the SAVE button and then one of the 16 step buttons to select the location where the
pattern will be saved. This saves all 32 steps of each of the eight sounds of the current
pattern. ADS-7 has overall 32 saving slots.
LOAD button
Press the LOAD button and then one of the 16 step buttons to select the pattern to load.
This will load all 32 steps of each of the eight sounds from the saved pattern. ADS-7 has
overall 32 loading slots.
CLEAR function
In order to delete the programmed sequence of a particular drum section, you need to
press the LOAD button then release it and press the SAVE button. In order to delete the
entire programmed sequence using several or all of the drum sections you need to press
the SAVE button then release it and press the LOAD button.
MIDI IN
MIDI notes are transmitted in real time to 8 trigger outputs in the following order:
BD-48 note, OH-50, CH-52, CL-53, G1-55, G2-57, G3-59, TR-60.
Note: MIDI NOTE MAP is indicated on the ADS-7 panel in the SEQUENCER section.
If MIDI CLOCK messages are received, the sequencer will synchronize with MIDI CLOCK and
will disconnect its internal clock. When synchronized to MIDI CLOCK, the tempo control can
be used to select the amount of MIDI CLOCK per step (1-32). When the MIDI CLOCK
message are not received within 1 second, the sequencer switches back to its internal clock.
The MIDI START message starts the sequencer.
The MIDI STOP message stops the sequencer.
The MIDI CONTINUE message starts the sequencer from the last step.
MIDI OUT
MIDI CLOCK messages are sent from the MIDI OUT. MIDI notes in messages are sent via
MIDI OUT for MIDI control of other drum devices.
Warranty:
The standard warranty on ADS-7 synthesizer is for one year from the date
of purchase.
1. The warranty does not apply in the following cases:
- Expiration of the guarantee (after one year from the date of purchase); After-guarantee servicing is possible,
shipping both ways is at the expense of the buyer. We try to stay reasonable concerning servicing;
- There is any mechanical damage to the inside and/or outside of the unit;
- There are signs of opening or self-repair;
- A malfunction caused by self-updating software, or installing additional options/mods;
- A malfunction caused by damage of the product by other objects and liquids, as
well as results of fog, rain and snow.
2. The guarantee does not apply to:
- Adapter;
- Controls if their failure was caused by normal wear or contamination during use.
Feel free to email us if you have any questions:
avpsynths@gmail.com
