pg.
8
AVProConnect ~ 3518 N Casco Ave. Sioux Falls, SD 57104~ 1.877.886.5112 ~ +1.605.274.6055 ~
support@avproconnect.com
■
Panel Descriptions
Front Panel
Activity Display (Front):
a)
When Power is applied all lights flash RED and the machine
begins to function. If no devices are plugged in, you can
verify power by looking inside the vent on the right side of
the unit.
b)
When the INPUT device is plugged in, the light blink RED
while
“handshaking” is occurring, and goes SOLID once
communication is complete and signal is good.
c)
When a sink (display) is plugged into an OUTPUT, the
corresponding light blinks RED until the “handshake” is
complete. Once the connection is made the OUTPUT lights
will go SOLID (If a sink or display is plugged in).
AC-DA12-AUHD
