178.960UK User Manual
Rear Panel
Powering up
Your new PAL8 portable home PA unit may arrive with you with the internal battery charged.
Before connecting to the mains, turn down all volume controls and switch the unit on (7) and
the power LED should light. The battery charge status is shown on 4 LED indicators (6).
If there is little or no charge, you will need to charge the battery before using away from mains
power.
Connect the PAL8 unit to the mains using the IEC lead supplied (9) or a suitable equivalent.
When not in use but connected to the mains, if the POWER switch is in the OFF position, the
internal battery will be re-charged from the mains supply, indicated by a CHARGING LED, which
lights when charging.
You may otherwise opt to connect the DC input at the rear (8) to an external 12Vdc supply (e.g
car battery) or use the internal battery if charged.
1
Media player display
2
Media player and LED controls
3
Line output (2 x RCA)
4
VHF microphone volume
5
Line input (3.5mm jack & 2 x RCA)
6
Battery status LEDs
7
Power on/off
8
12Vdc external power input terminals
9
IEC mains power inlet & fuse
10 MicroSD/TF card slot
11 USB pen drive input
12 Master volume
13 Treble boost/cut
14 Bass boost/cut
15 Echo effect level
16 Wired mic volume
17 Guitar input volume
18 VHF microphone antenna
19 Wired microphone input (6.3mm jack)
20 Guitar input (6.3mm jack)
