U-MIC DUAL User Manual
Introduction
Thank you for choosing the U-MIC for your wireless microphone requirements.
This system is designed to provide a reliable, cable-free solution with minimal
setup and ease of use. Please read and keep this user manual to get the best
results from your product and avoid damage through misuse.
Layout
Setting up
The U-MIC is supplied as 2 individual handheld microphone transmitters and a
USB receiver with a 3.5mm to 6.3mm jack lead.
The USB type A plug (4) on the receiver should be connected to a USB port for
power (5V, 1000mA). This can be from a USB power adaptor or power bank for
portable use if required. The connection can also be made to the receiver using
an optional USB extension lead if preferred.
Note: the audio is not transmitted to the USB port. The USB is for power only.
If the USB port is a U-Disk player or computer port, the digital media (USB stick)
or other peripheral device can still be connected through the receiver by
connecting to the USB type A socket (6) on the rear of the receiver.
1. LED power indicator
2. Power switch
3. Battery compartment
4. USB type A plug
5. 3.5mm audio output
6. USB type A socket
