22
3.5.2 Record Timer
To schedule alarm and motion recording, enable it, and select the day and time for recording.
Note:
The timer must be enabled for the record function to work properly.
Note:
The selected time will be yellow-colored.
3.6 Storage
3.6.1 Memory
In “Memory”, you can check the remaining capacity for recording, or clear all recorded data saved if needed.
Note:
The recorded data will be removed also when you reset or reboot this camera.
Note:
To save more recorded data, it’s recommended to use this camera with the compatible NVR.
Note:
To know the total recording time per recording resolution, please refer to “APPENDIX 6
RECORDING TIME TABLE” at page 40.
3.7 Trigger
3.7.1 Trigger
You can configure how this camera reacts when there’s an alarm or motion event.
