3
2. CAMERA ACCESS WITH INTERNET EXPLORER
This network camera can be accessed via Microsoft Internet Explorer and iOS / Android mobile devices with our
self-developed program “EagleEyes” installed depending on different using situations.
Before using the camera, make sure you have configured the network settings, and the network connection is fine.
For network configurations, please refer to:
“
ADVANCED NETWORK SETUP
” downloadable from
www.surveillance-download.com/user/m3636.swf
.
2.1 Camera Login
Step1: Open your web browser, and key in
http://
ipaddress
:
portnum
in the URL address box.
For example, for the IP address 60.121.46.236 and port No. 888, please key in ”http://60.121.46.236:888” into
the URL address box, and press “Enter”.
Step2: In the login page, key in the user name and password, and enter the security code from the image below if any.
Then, click “LOGIN”.
Step3: The wizard is then started.
‧
To skip the wizard and directly access the camera live view, click “Close”.
‧
To directly access the camera live view without starting the wizard for the login next time, check “Do not start wizard at login”.
Note:
If you’re prompted to install “VLC player”, “Software” and “H264 Streaming Viewer”, please
agree to proceed the installation.
Step5: When the login is successful, the live view is shown.
2.2 Control Panel Overview
Note:
The buttons available depend on the device you have and the user level used to log in.
