24
Detect
Item
Description
External Alarm*
Enable or disable detection from external alarm-in device, and click the title
External Alarm
(in blue) to set
N.O.
or
N.C.
depending on the configuration of your alarm-in device.
Motion
Enable or disable motion detection.
Motion detection is not supported when the stream format is Motion JPEG.
When
Enable
is selected, click
Detection
to enter the motion detection area setting page as follows:
Sensitivity:
Set the detection sensitivity from the drop-down list:
High
,
Normal
or
Low
.
Area Setting:
Set the motion detection area by selecting the area grids with your mouse. Pink grids represent the area that is not being
detected while the transparent grids are the area under detection. You can set multiple areas under detection.
Click
Clear All
to set the whole area undetected.
Click
Select All
to set the whole area under detection.
Audio*
Enable or disable audio detection.
When this function is enabled, make sure you’ve finished configurations of audio detection in
Camera
Audio
.
Duration
Set the duration time for trigger recording (
5
/
10
/
20
/
40
seconds).
* For selected models only
Action
Here defines how the camera delivers alerts to you for any event.
Item
Description
Select the event type you want to receive E-mail notifications when it occurs.
Then, click the title
(in blue) to choose the media type configured in
Camera
Video
, file format (
AVC
/
AVI
), record internal (
1
~
5
seconds), record time (
1
~
5
seconds) and pre-alarm recording time (
1
~
5
seconds) for
the event video clip.
The camera will send the captured video clip to the E-mail address(s) you assigned in
Network
once the
selected event type occurs.
FTP
Select the event type you want to receive FTP notifications when it occurs.
Then, click the title
FTP
(in blue) to choose the media type configured in
Camera
Video
, file format (
AVC
/
AVI
), record internal (
1
~
5
seconds), record time (
1
~
5
seconds) and pre-alarm recording time (
1
~
5
seconds) for
the event video clip.
The camera will upload the captured video clip to the FTP site you assigned in
Network
FTP
once the
selected event type occurs.
SMS
Select the event type you want to receive a text message when it occurs.
The camera will send a text message to the mobile phone number you assigned in
Network
SMS
once the
selected event type occurs.
Alarm Out*
Select the event type you want to trigger the alarm-out device to work when it occurs.
Then, click the title
Alarm Out
(in blue) to configure the trigger rule (
LOW
/
HIGH
).
Record
Select the event type you want to enable event recording when it occurs.
Audio Alert*
Select the event type you want to enable audio alert when it occurs.
* For selected models only
