MAIN MENU
31
7.4 ADVANCED CONFIG
7.4.1 CONNECTION
To manually assign the address of your camera connected locally, click
URI
to modify.
ADVANCED CONFIG
CONNECTION
CHANNEL
URI
CONFIG
CAMERA
CH1 AVTECH://ip_office.ddns.eagleeyes.tw:80
SETUP
DETECTION
CH2 ONVIF://10.1.1.125:88
SETUP
ALERT
CH3 AVTECH://10.1.1.30:88
SETUP
NETWORK
CH4 AVTECH://10.1.1.12:88
SETUP
DISPLAY
CH5 AVTECH://10.1.1.14:88
SETUP
RECORD
CH6 ONVIF://10.1.1.15:88
SETUP
NOTIFY
CH7 AVTECH://10.1.1.16:88
SETUP
MULTICASTING
CH8 AVTECH://10.1.1.17:88
SETUP
JOYSTICK
CH9 AVTECH://10.1.1.18:88
SETUP
CH10 ONVIF://10.1.1.19:88
SETUP
CH11 AVTECH://10.1.1.20:88
SETUP
CH12 AVTECH://10.1.1.21:88
SETUP
NEXT
EXIT
Then, click
SETUP
to enter the access information of the camera:
CONFIG-CH1
CACHE TIME (MSEC)
VENDOR
AVTECH
DEVICE
IPCAM(FIXED)
PROFILE
PROFILE-3
TYPE
H264
IMAGE SIZE
720 X 480
QUALITY
I.P.S. 30
AUDIO ON
EXIT
Step1: Click
DEVICE
to detect and make sure the access information you’re intended to connect is correct.
Step2: Select the image size, image quality, and I.P.S.
CACHE TIME (MSEC)
determines the buffering time of playback.
Note:
To speed up camera's operation, especially PTZ camera, please go to
ADVANCED
CONFIG
CONNECTION
to set the
CACHE TIME (MSEC)
as zero, but this change in configuration may
debase the transmission quality.
Note:
The options selectable for
IMAGE SIZE
and
I.P.S.
depends on the camera you’re intended to
connect.
Step3: (Optional) For the camera with audio recording, select
ON
or
OFF
.
