MAIN MENU
42
PUSH STATUS
Before using this function, make sure:
You have iPhone, iPad, or Android mobile phone or tablet.
You have subscribed the mobile network service from your mobile service provider.
The mobile app, EagleEyes, is installed in your mobile device. For details, please refer to “8.2 Mobile Devices” at page 50.
You have configured EagleEyes to access this recorder, and “Guard” is enabled. For details, please refer to “8.2 Mobile Devices”
at page 50.
You’ll get a text message telling you the occurrence of selected system event(s).
ADVANCED CONFIG
CONNECTION
PUSH VIDEO PUSH STATUS MESSAGE MAIL VIDEO MAIL VIDEO FTP
CAMERA
ACTION ON
DETECTION
EVENT
ALL
ALERT
VIDEO LOSS
NETWORK
HDD FULL
DISPLAY
POWER ON
RECORD
HDD (CLEAR / NO HDD / OVER TEMPERATURE)
NOTIFY
NET LOGIN
MULTICASTING
KEY UNLOCK
JOYSTICK
NETWORK
UPS
SYSTEM ABNORMAL
EXIT
Step1: Switch
ACTION
to
ON
.
Step2: Select the system event(s) you want to get notified via your mobile device.
Step3: Enable
GUARD
in EagleEyes on your mobile device, and try to trigger an alarm event to see if you’ll
get Push Status.
MESSAGE MAIL
Note:
For E-mail notifications, make sure you have configured an E-mail account in
NETWORK
to send the notifications.
Enable this function in
ACTION
, select the event type(s) you want to send notifications in
EVENT
, and add the
E-mail address(es) to which you want to send notifications in
RECEIVER
.
You’ll get an E-mail telling you the occurrence of your selected event(s).
ADVANCED CONFIG
CONNECTION
PUSH VIDEO PUSH STATUS MESSAGE MAIL VIDEO MAIL VIDEO FTP
CAMERA
ACTION ON
DETECTION
EVENT
ALL
ALERT
VIDEO LOSS
NETWORK
HDD FULL
DISPLAY
POWER ON
RECORD
HDD (CLEAR / NO HDD / OVER TEMPERATURE)
NOTIFY
NET LOGIN
MULTICASTING
KEY UNLOCK
JOYSTICK
NETWORK
UPS
SYSTEM ABNORMAL
RECEIVER SETUP
EXIT
