EAZY NETWORKING
59
APPENDIX 6 EAZY NETWORKING
EaZy Networking is a free P2P cloud service to connect AVTECH devices to the Internet automatically by
plug-and-play, enabling you to check the live view via your mobile device or laptop at anytime.
In most cases, the device is connected via P2P. Connection via the relay server is only applied to some complex
environments such as the private IP-based network environment used by a large enterprise. There is no speed
limitation of P2P connection. For connection via the relay server, the speed is up to 10FPS@512kbps. To obtain stable
transmission, it's recommended to purchase our data plan of 1GB or 7GB. Each device will enclose a 2GB data plan
for a free trial.
EaZy Networking could be configured via EagleEyes on an iOS / android device, or via Internet Explorer.
Before using this function, make sure:
This device is connected to a switch or router, and the switch or router is ready for Internet connection.
The network icon on the top right corner is
, not
.
You have an iOS / Android mobile device with EagleEyes installed, or a PC / laptop with Internet Explorer installed.
A6.1 Via EagleEyes on iOS / Android Device
A6.1.1 Setup
Step1: Right-click to show the main menu, and select
NETWORK
WAN
. Set
NETWORK TYPE
to
DHCP
,
and make sure the network icon on the top right corner is changed from
to
.
Note:
If the setting is made via the Setting Wizard, the network type will be automatically switched to
DHCP.
ADVANCED CONFIG
CAMERA
WAN E-MAIL
DDNS PROTOCOL
EaZy
DETECTION
NETWORK
TYPE
DHCP
ALERT
IP
192.168.001.010
NETWORK
GATEWAY
192.168.001.254
DISPLAY
NETMASK
255.255.255.000
RECORD
PRIMARY
DNS
8.8.8.8
DEVICES
SECONDARY
DNS
168.95.1.1
DCCS
PORT
80
IVS
CHECK
INTERNET
AVAILABILITY BY ADDRESS
www.google.com
NOTIFY
EXIT
MAC:
00:0E:53:EC:A7:B4
Step2: In the same menu, select
EaZy
. Enable EaZy Networking, and leave this page open. You’ll need to scan
the QR code later.
QUICK START
GENERAL
ENABLE
EAZY
NETWORKING
ON
TIME SETUP
DAYLIGHT
EaZy
EXIT
