background image

 

 

MENU 

 

 

DESCRIPTION 

DAY / 
NIGHT 

 

 

No function for this model. 

AWB MODE 

AUTO 

Automatically adjust the white balance based on the surrounding 
environment.  

  

USER 

Manually adjust the white balance parameters. 
Choose 

USER

, and click 

 (ENTER) to enter the 

USER MODE

 to 

modify R / G / B gain parameters. 

 

 

(PUSH) 

It’s used for the environment surrounded largely by a particular color, 
such as blue, causing color confusion. Aim the camera to a white 
place, and select 

(PUSH)

 to memory this white. Then, aim the 

camera to where it’s supposed to face. 

 

 

HOLD 

It’s used to force the camera memorizing the current white balance 
setting and remain the same even when the environment is changed.

  

8000K 

 

6000K /   
4200K /   
3200K 

Switch to the suitable color temperature based on the current 
environment to get the right color. 
8000K = Shade; 6000K = Cloud; 4200K = White fluorescent; 3200K = 
Halogen light bulb. 

AWB 

MODE 

R-G GAIN 

Adjust the red-green value from 1 ~ 255. 

 

 

B-G GAIN 

Adjust the blue-green value from 1 ~ 255 

AE 

MODE 

ESC 

Not available for this model. 

(automatic 
exposure) 

 

HOLD 

Not available for this model. 

 

 

DC 

Not available for this model. 

 

BRIGHT 

0 ~ 255 

Set the level of brightness to adjust the brightness of the image.   
The more the value, the brighter the image. 

 

SHUTTER 

AUTO 

Automatically adjust the shutter speed for exposure based on the 
current environment. 

 1/25 

1/30 
1/50 
1/60 
1/100 
1/120 
1/250 
1/500 
1/1000 
1/3000 
1/10000 

Manually choose the shutter speed you need for exposure.   

 

FLICKER 

OFF / 50HZ / 
60HZ 

Enable this function to fix the flicker situation. 

BLC 

0 ~ 16 

Adjust the image to compensate for an area that is overpowered by 
brightness because of excessive light. The image will be properly 
exposed for clearness. 
Note: This function is available only in the day mode. 

AGC 

1 ~ 5 

Set the level of Auto Gain Control to detect and enhance the image 
signals when the light condition is poor.   
The higher the value, the stronger the signals will be enhanced, and 
the more noise the image will get. 

 

LSC 

ON / OFF 

Enable or disable Lens Shading Correction to correct the 
phenomenon of vignetting when the focal length is short. 

 

Summary of Contents for AVT1301








Reviews: