MENU
DESCRIPTION
SPECIAL PRIVACY
ZONE
AREA SEL.
Select AREA1 or AREA2 to show a predefined area for masking. To
move and change the area, please go to SX / EX / SY / EY.
MASK PAT.
Select the color to mask: black / gray / white. Select OFF to disable
area masking.
SX
Extend / narrow the current area from the left side.
EX
Extend / narrow the current area from the right side.
SY
Extend / narrow the current area from the top.
EY
Extend / narrow the current area from the bottom.
MOTION*
MOTION
Enable
(
ON
) / disable (
OFF
) motion detection.
SENSITI.
Set the sensitivity to trigger motion detection. The higher the value,
the more sensitive the camera to trigger motion detection.
ALARM
Choose the way to show motion detection is triggered:
TRACE
to
frame the area in red which motion trigger occurs on the screen, or
ICON
to simply show a running man icon for motion trigger
occurrences.
HOLD TIME
Set how long the alarm lasts in second from 1 to 10.
HLC
HLC
HLC (high light compensation) is used to suppress strong backlight
for clearer images. A grey mask will be covered on the source of
the strong light.
Choose
ON
and click
(ENTER) to select the areas for this
function.
The screen will be divided into 16 areas. Move to the area you
want, and click
(ENTER) to make
X
to
O
.
MASK VALUE
Set the darkness of the mask.
The more the value, the lighter the grey you’ll get. The less the
value, the darker the grey you’ll get.
THRESHOLD
Set the level of light source which enables masking.
The more the value, the stronger the light source will trigger HLC;
the less the value, the lighter the light source will trigger HLC.
EFFECT
COLOR GAIN
0 ~ 255
Set the level of color saturation.
The more the value, the more saturated the color will be, but the
more noise the image will get.
COLOR HUE
0 ~ 71
Set the level of hue.
SHARPNESS
0 ~ 255
Set the level of sharpness to enhance the clarity of image detail by
adjusting the aperture and sharpening the edges.
The more the value, the sharper the image will be.
CONTRAST
0 ~ 255
Set the level of contrast.
The more the value, the more the contrast level of the image will be.
BRIGHT OFF.
-128 ~ 127
Set the level to compensate the brightness of the image if needed.
The more the value, the brighter the image will be.
MIRROR
OFF / ON
Enable to turn the images horizontally based on your installation
situation when necessary.
FLIP
OFF / ON
Enable to flip the image 180° when necessary.
* The function here is for this camera only, and the detection log will be not noted in the DVR.
