CONNECTION
1. DC12V Input Terminal
Connect the power terminal of the camera to a DC 12V regulated power supply.
Note:
Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power tolerance of
this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this unit.
2. Video Output Connector (VIDEO OUT)
Connect the camera video output to the video input of a DVR with 75
Ω
coaxial cable.
Note:
To ensure the camera has sufficient protection against moisture, an extra waterproof measure, such
as by using an insulating tape, must be used to cover the power and video connectors after
connection.
FOCAL LENGTH & FOCUS ADJUSTMENT
This function is available for Model 2 only.
Note:
The access path is taking our HD CCTV recorder as an example. If you’re using other brand’s recorder,
please refer to its own user manual to know how to access the camera parameters.
Based on the recorder type you have, on the live view:
Type 1
Click twice on the channel that this camera is connected to show in full screen, and click on
on the
right side to display the PTZ control panel.
Type 2
Click twice on the channel that this camera is connected to show in full screen, and click on
on the
bottom left of the channel to show the PTZ control panel.
How to adjust
＋
/
－
Zoom in / out max
Click to zoom in on the image to the largest / zoom out on the image to its
original size.
/
Zoom in / out
Click to zoom in / out the image.
/
Focus near / far
Click to adjust the focus of the image.
