Room Alert 32E
AVTECH Software, Inc.
7
Switch Sensors
Sixteen (16) sets of dry contacts connect Room Alert
32E to any AVTECH switch sensor or dry contact on
a device (e.g., HVAC, generator, pump, fan, etc.) via
standard speaker wire or low-voltage 2-wire cable.
Switch Sensor Port 1 is shown here.
Reset Button
A small push button resets Room Alert 32E to factory
default settings. (Please push softly.)
On Off Button
A push button turns the Room Alert 32E’s internal
battery back-up on and off.
Power Port
A standard power port connects Room Alert 32E to
an electrical outlet with any AVTECH International
Power Adapter.
Look for the AVTECH logo. Using another power adapter could
damage the Room Alert 32E’s circuit board and void the warranty. If
you need one, purchase it online at
AVTECH.com
.
AVTECH has an
international power adapter with a compatible plug style for each and
every country.
NOTE