Room Alert 32E
8
AVTECH Software, Inc.
A
Front
Back
B
Front
How To Install Your Room Alert 32E
Step 1: Connect Your Room Alert 32E Hardware
If Your Network Is Power Over Ethernet (PoE) Enabled
Connect one end of a standard Ethernet cable to
the Room Alert 32E’s Ethernet port.
Connect the other end to a PoE-enabled network
jack.
That’s it! Your Room Alert 32E is now powered and discoverable on your network.
If Your Network Is Not Power Over Ethernet (PoE) Enabled
A. Connect To Your Network First
Connect one end of a standard Ethernet cable to
the Room Alert 32E’s Ethernet port.
Connect the other end to a network jack.
B. Then Connect To A Power Source
Plug one end of AVTECH’s International Power
Adapter into the Room Alert 32E’s power port.
Plug the other end into a surge-protected power
source.
Your Room Alert 32E is now powered and discoverable on your network!
Use only AVTECH’s International Power Adapter. Others could
damage the Room Alert 32E
and void your warranty. If you don’t
have one, please visit our online store at
AVTECH.com
.
NOTE