Room Alert 32E
46
AVTECH Software, Inc.
3.
In “Server Port,” enter the port Device ManageR uses. The default is 8080.
4.
In “Push Interval,” choose the number of minutes you would like between pushes from
the drop-down list.
5.
Click
Accept Changes
at the bottom of your screen to temporarily save your settings.
You may now navigate to another screen; however, if you close the web interface before
the next step, you will lose your changes.
6.
Click
Save Settings
in the navigation bar to the left of your screen. Your Room Alert
32E will automatically reboot and commit your changes.
Time & Date Configuration
You may set the time and date defaults for your Room Alert 32E here.
1.
In “Time Zone,” select your time zone from the drop-down list. Greenwich Mean Time
(GMT) is the default.
2.
In “Time Display,” you may select the 12- or 24-hour format from the drop-down list.
The 24-hour setting is the default.
3.
In “Time Format,” you may select either the MM/DD/YY and DD/MM/YY date format
from the drop-down list. Month first is the default.
4.
Select
Daylight Savings
if you would like your Room Alert 32E time setting to
compensate by +1 hour for daylight savings time.
5.
In “Time Server IP,” you may leave Room Alert’s default Network Time Protocol
(NTP) server IP address, 198.82.1.201, or enter another time server IP address.
6.
However, if you’d rather enter your NTP hostname, such as “time.nist.gov,” click
Resolve hostname?