Avtech Room Alert 32W, User Manual And Reference Manual

3 

AVTECH Software Inc.

Installation 

Room Alert 32W

Installation

The initial installation of the Room Alert 32W can be completed quickly and easily provided the 
instructions below are followed with detail and care. Before beginning, please lay out the contents of the 
Room Alert 32W package so that the components can all be located and accessed with ease. 

NOTE: This manual describes how to properly install and use AVTECH’s Room Alert 3W IT & facilities environment monitor. 

Although this manual was written for the Room Alert 3W, it also applies to AVTECH’s non-wireless version the Room 

Alert 3E. If you have a Room Alert 3E please follow the instructions below and disregard reference to setting up wireless 

components such as installing and confi guring the external antenna, WiSHs, WiSPRs and more.

Package Contents

The main components included with the standard (default) Room Alert 32W package include:

    •  One (1) Room Alert 32W ID Box (with built-in temperature, humidity, main power, UPS & PoE)

    •  One () Ethernet Cable (0’ length, red)

    •  One (1) AVTECH 5v 1A Power Adapter (110-240v, 50-0Hz)

    •  One (1) Digital Temperature Sensor

    •  One (1) Room Entry Switch Sensor

    •  One (1) Powered Wireless Sensor Hub (P-WiSH)

    •  One (1) External Antenna w/13´ Cable & Magnetic Mount

    •  One () 

Room Alert 32W User’s Guide & Reference Manual

 (you’re reading it now)

    •  One (1) Set Of Four (4) Rack Mount Bolts & Cage Nuts (Square Plug Adapters)

•  One (1) Package Of Literature & Additional Information

NOTE: Some of the components arriving with this package may be individually wrapped and contain additional supporting 

components. Please remember to keep these components together as they will be required for proper setup. If you received 

additional components (i.e. like additional sensors) that are not mentioned above, instructional material explaining the proper 

setup of that component should be included with it. If you cannot fi nd the proper instructional materials, check the  ‘Support’ and 

‘Downloads’ sections of the 

AVTECH.com website for any appropriate installation or application note that will instruct you on the 

proper installation and use of that component. Install those components after the Room Alert 3W setup is completed.

Room Alert 32W ID Box

The graphics below identify the primary components of the Room Alert 32W ID box that are visible on 
the front and rear panels. Descriptions are provided for the identifi cation of key items.

Front View (shown here without rack mounting brackets)

A 

     B 

 C 

          D       E       F                  G

Built-In UPS Power Indicator

 — This LED indicates the current status of power and the built-

in 

Uninterruptible Power Supply (UPS) of the Room Alert 32W monitor. If this LED is illuminated 
red, this indicates that the Room Alert 32W monitor is running on internal battery backup power. If 
illuminated green, this indicates that the Room Alert 32W monitor is running on main or PoE power.

A.