ALARM SETTING
BACK
EXIT
-------------------------------------
ALARM NUMBER
001
ALARM ACTION
TOUR
ACTIVATE AUX
NONE
ALARM PRIORITY
HIGH
ALARM NUMBER:
ALARM ACTION:
ACTIVATE AUX:
ALARM PRIORITY:
BACK:
supports up to 7 alarm ( 7 input & 1output pre-wired)
Setting for PRESET, SCAN, TOUR, PAT 1-4, or NONE, if the camere in alarm position.
Setting Alarm Output, when Alarm is activate. Select between AUX1, AUX2 (not connected)
or BOTH.
Priority when multiple alarms are triggered.
Move to previous menu.
ALARMS
BACK
EXIT
RESUME
OFF
SEQUENCE
002
RESET DELAY
020
ALARM CONTACT
N/C
ALARM SETTING
ARM SETTING
→
→
RESUME:
SEQUENCE:
RESET DELAY:
ALARM CONTACT:
ENABLE WINDOW:
ALARM SETTING:
ARM SETTING:
Continue the function on the camera , if it was setting before the alarms.
How long the camera stay in Alarm position.
Setting between N/C (normal Close) or N/O (normal Open).
Activate the masking window
expanded Alarm setting
expanded Alarm setting
Alarms
Alarms
Alarm Setting
ARM SETTING
BACK
EXIT
--------------------------------------
DAY
SUN
ARM STATE
OFF
ARM TIME
N/A
UNARM TIME
NA
DAY:
ARM STATE:
ARM TIME:
UNARM TIME:
Arm setting for weekdays
Arm or disarm the alarm for the selected weekday
Scheduled alarm time
Disarm time.
Alarms
Arm Setting
LANGUAGE
--------------------------------------
LANGUAGE
ENGLISH
BACK
EXIT
LANGUAGE:
Selectable between available languages.
Language
OSD
8
English
The Time Running function is a scheduled start for predefined action, such as preset tour, scan tour ..etc. This dome
supports up to 4 schedules. Before setting this function, please make sure that the system time has been set correctly.
TIME CHANNEL:
START TIME:
END TIME:
RUNNING:
Currently selected schedule
Start time of the selected schedule
End of the schedule
Define the action to be started. Select None to deactive the function.
TIME RUNNING
--------------------------------
►
TIME CHANNEL
1
START TIME
00:00
END TIME 01.00
RUNNING
NONE
BACK
EXIT
Function Setting
Time Running
EDIT ZONE LABEL
LABEL: ZONE -1
---------------------------------------
BACK
EXIT
Function Setting
Zones
Edit Zone Label
Enter the zone name here.
The Window-Blanking function is use to protect the privacy in observed area, as this might be requested by
the law. It is also known as “Privacy Masking”, which cover the selected area with a blank window, depend on
modul how much Masking it has.
Currently selected window
Edit the current masking window
Activate the masking window
Dclear the selected masking window
WINDOW NUMBER:
EDIT WINDOW:
ENABLE WINDOW:
CLEAR WINDOW:
Window Blanking
WINDOW BLANKING
---------------------------------------
WINDOW NUMBER
01
EDIT WINDOW
ENABLE WINDOW
OFF
CLEAR WINDOW
BACK
EXIT
