Zoom Speed:
Digital Zoom:
BLC MODE:
SLOW SHUTTER:
WDR MODE:
Define the Zoom speed. Selectable: LOW/HIGH
Activate digital zoom, depend on Modul
Back-Light Compensation mode. Use this option when the observed object has a strong
back-light such as the sun light or other light source.
The slow-shutter allows a higher sensitivity by exposing the image sensor with a longer period of time,
incase the observed objects does not have much movement.
Activate Wild Dymamic Range, depend on Modul
Note: This function is only available for models with Day/Night ability. please contact your local dealer in case of doubt.
ADVANCE SETTING
---------------------------------------
AE MODE
AUTO
SHUTTER
N/A
IRIS
N/A
BRUGHT
N/A
WB MODE
AUTO
R GAIN
N/A
B GAIN
N/A
HI RESOLUTION
ON
BACK
EXIT
→
CAMERA SETTING
---------------------------------------
ZOOM SPEED
HIGH
DIGITAL ZOOM
ON
BLC MODE
OFF
SLOW SHUTTER
OFF
LINE SYNC
N/A
WDR MODE
N/A
BACK
EXIT
ADVANCE SETTING 1
ADVANCE SETTING 2
→
→
Camera Setting
Camera Setting
ADVANCE SETTING 1
ADVANCED SETTING:
AE MODE:
SHUTTER MODE:
IRIS MODE:
BRIGHTNESS:
AUTO:
WB MODE:
R-Gain:
B-Gain:
High-Resolution:
Enters the advenced setting module for the camera setting
Auto-Exopsure mode. This camera supports various exposure methods for different environment:
In shutter mode, the camea changes the shutter speed to regulate light.
Regulate the Iris-openning to control the exposure
Regulates the exposure by changing the brightness control
Automatically regulates the exposure modes.
The camea supports ATW, Indoor and Outdoor mode of White balance, which chooses the correct color of the
image.
Regulates the red elements in the image color
Regulates the blue elements in the image color
Turns the High-Resolution mode of the camera. only available on supported
camera models.
IR CUT FILTER
--------------------------------------
IR CUT FILTER
COLOR
IR CUT ON TIME
N/A
MAX GAIN
28dB
BACK
EXIT
IR CUT OFF TIME
N/A
IR CUTTER:
IR CUT ON TIME:
IR CUT OFF TIME:
MAX GAIN:
Enables the removal of Infrared Cutter Filter (IRC), also known as “DAY/NIGHT” mode.
- Color Mode: remains in the day mode
- Black: IRC remains in night mode.
- TIME: Controlled by the time schedule.
When the IR Cutter should turn on, given in day time.
When the IR Cutter should turn off, given in day time.
Note: This function is only available for models with Day/Night ability. please contact your local dealer in case of doubt.
improve the image quality in the Night modus
Camera Setting
Advanced Setting
OSD
6
English
The password function can prevent unauthorized access to the OSD and change the setting. It consists a 6 digit number
from 0-9 and can be disable.
Enter the old password
: Enter the new password with 6 digit number
Enter the new passwor again
ENABLE PASSWORD: Activate the login function to the OSD
Default password: 000000
Supervisor password: 892226
OLD PASSWORD:
NEW PASSWORD
CONF PASSWORD:
PASSWORD SETTING
---------------------------------
OLD PASSWORD ******
NEW PASSWORD ******
CONF PASSWORD ******
ENABLE PASSWORD OFF
BACK
EXIT
The system is equipped with a RTC (Real-Time Clock) and can be used to display the date/ time information on the
screen, or schedule enabled operation. In order to use these functions correctly, you need to setup at first.
Change the time setting
Change the date setting
Use [LEFT], [RIGHT] to move the cursor and use [UP], [DOWN] to adjust the value. When finished, press [IRIS OPEN] to
save the setting.
TIME:
DATE:
CLOCK SETTING
--------------------------------
TIME:
HH:MM:SS
DATE:
YY/MM/DD
BACK
EXIT
System Setting
Password Setting
System Setting
Clock Setting
The “CLEAR” function resets the settings to factory default.
Delete all zones setting
Delete all preset positions
Delete all pattern setting
Delete all tours setting
Delete all privacy masking setting
Reset all setting and return to factory settings
Restart the dome
CLEAR ALL ZONES:
CLEAR ALL PRESET:
CLEAR ALL PATTERNS:
CLEAR ALL TOURS:
CLEAR ALL WINDOWS:
FACTORY DEFAULT:
RESTART:
Note: after using the option “Factory default”, all system setting and stored information such as preset, tour or pattern will be
erased permanently. Please make sure of using this function before proceeding.
CLEAR
-------------------------------
CLEAR ALL ZONES
CLEAR ALL PRESET
CLEAR ALL PATTERNS
CLEAR ALL TOURS
CLEAR ALL WINDOWS
FACTORY DEFAULTS
RESTART
BACK
EXIT
System Setting
Clear
