AV762FTBA-2812
1. Use the Appropriate Power Supply.
The input power for AV762FTBA-2812 is DC12V/AC24V. Be sure to
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are
service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could
by improper handling or storage.
be damaged
4.
Do not place the camera in the following locations:
Locations where temperature is lower than -20 C or higher than 55 C;
Locations where humidity is higher than 90%
;
5. Clean the image sensor faceplate with care.
When cleaning the
panel, do not use strong or abrasive
tissue or cotton tipped applicator and
image sensor
detergents,use a piece of lens
6. Do not attempt to aim the camera at the sun.
Do not attempt to aim the camera at the sun or other extremely bright
to appear irrespective of whether the
objects, that cause smear
camera is operating or not. This can damage the image sensor.
7. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless
emits strong electromagnetic field,
communication device that
some irregularity such as noise on monitor screen may
happen.
connect it to the appropriate power,wrong connection may cause
malfunction and /ordamage to the video camera.
no user serviceable parts inside. Any questions please ask a qualified
Thank you for your purchasing this product. Before attempting to
connect or operate this product, please read these instructions carefully
and save this manual for future use.
ethanol.
AV762FTBA-2812 uses advanced imaging technology with resolution as high
comes with a powerful OSD menu that include motion
,
CVBS 1280H output,
,
2D/3D noise reduction.
detection,
digital zoom, privacy zones, lens shading compensation, DPC Auto electronic
shutter, AWB, image sharpening, etc.
as 1080P,
support AHD/THD/CHD1080P output meanwhile
self-adaptive
AV762FTBA-2812
1.
. High resolution,1080P, true color recovering
.
5. DC12V/AC24V duplicate supply design
6.Waterproof: IP66
7. simple operation
8. OSD menu
1/2.9" CMOS
2. CVBS 1280H output, support AHD/THD/CHD1080P output meanwhile
Self-adaptive 2D/3D image denoising
3
4
1.
Hood
2.
3. Lens
4. Front cover
5. Camera body
6. 3-axis bracket
7. Four install screws holes
(at bottom of the bracket)
IR LED
1
3
6
5
7
2
4
All manuals and user guides at all-guides.com
