3
4
Some products may not be available in your country, please contact our distributor for more details
Some products may not be available in your country, please contact our distributor for more details
3.PACKING LIST
Safety Instructions before starting
- Do not install and operate this appliance in a flammable and / or explosive environment.
- Make sure that the installation is done according to the local electricity safety
regulations of your country.
.
- Before installation and maintenance, make sure that the appliance is disconnected
from the power source.
- Do not use any power source other than 24V AC, in order to prevent damages to the
device. Please refer to the section "Precaution" for more details.
- Handle the device during the installation with care. Droping the product or extreme
vibration may cause irreparable damages and void the warranty.
- Do not install or operate the appliance close to high-voltage devices or high-voltage
cables. The safety distance should remain at least 50 m.
- To archive best image quality, it is recommanded to use underground cables shielded
by steel tube. Do not install the cable without any protection.
- In a thunderstorm area or region with high inductive voltage, such as high voltage
transformer stations, it is necessary to use additional lightning-proof equipment and/or
lightning robs for protection.
- For outdoor installations, lightning protection and grounding of the device should be
considered. Please refer to the industrial saftey regulations of your country.
.
- Grounding of the appliance should include anti-interference and fulfill the safety
requirements. Do not connect the ground with short-circuited or other high-voltage
electric networks.
- The resistance of down conductor should not exceed 4 Ohm, and its thickness should
be at least 25mm .
- This appliance has the lightning-proof function which can prevent damages caused by
high-voltage pulse, such as lightning strikes below 1500 V.
- This appliance meets the Ip66 standard for water and dust proof. Do not install the in-
door model for out-door applications as the model is not designed withstanding
permanent water exposure. Make sure that the installation is protected from long-time
water-drop or spatter, which may damage the appliance.
- Make sure that the enviroment of installation meets the requirements of the appliance,
such as holding the weight and providing enough space for bracket and power supply.
²
4.INSTALLATION
WARNING:
The transparent cover part is sensitive and must
be handled with care. Do not touch or rub the surface in any way
with the protection foil.Inproper cleaning methods will cause
permanent scratches on the cover and cause unclear image or
focusing error of the camera. For cleaning the cover, replace
the original cover with the spare cover, then wash it by
immersing it into warm water containing a non-corrosive
cleaning agent.
Indoor
Core unit
1 piece
Indoor Roof-Mount
base plate
1 piece
Instruction and
operation manual
1 piece
Outdoor
Core unit
1 piece
Outdoor housing
with sun shield and
cover
1 piece
Spare dome
cover
1 piece
USER'S
MANUAL
High Speed
dome
Camera Series
Instruction and
operation manual
1 piece
USER'S
MANUAL
High Speed
dome
Camera Series
