• Mainboard not work
•
1. check if the power supply have
12V and 5V output
•
2.Verify if the DC/DC convertors
have the right output
(5V,3.3V,2.5V,1.8V,1.32V)
•
3.Verify if the Mainchip(MSD306),
DDR, AudioAMP…solder well;
•
4.Verify if the FLASH(U9) has the
right software and work well;
•
5.Verify if the Y1(Crystal) has the
right frequency
Panel not work
1. check if the voltage input and
output of boost IC is working
normally.
2.Verify if the Mainboard output the
right On/Off signal to power board;
3.Verify if the Mainboard output the
LVDS singal to panel T-con board
4.Verify if the software is the right
version of this model.
5.Change the LVDS wire to check
if it’s broken.
- 55 -
