17
Operation and Function Description of Menu
First-time installation
Connect the power cord and antenna to your
television; then
turn on the TV. The first time you use your TV,the Installation
Guide menu
will appear on the screen as right.
Operate as follows:
1.In the Installation Guide menu, it shows the
"OSD Language",
“Country",and "tune type"
optional.
2.You can select each available option as you
desire.It is
recommended to select "English", "Australia" & "DTV". "ATV"
= Analogue TV
which is no longer common.
3. Press OK key to start the scanning.
4.During channel tuning,press MENU key you can skip ATV tuning or DTV
tuning.Press Exit key,you can Exit ATV tuning or DTV tuning.
5.The Installation Guide menu will " Complete "
after the scanning is finished.
Press the exit key to exit.
Note:
1. Installation Guide is displayed for the TV mode only when the TV is turned on for the first time.
2. If you would like to scan for stations again,select " Auto scan " in the Channel menu.
Move
OK
EXIT
Select
Quit
English
OSD Language
Country
Tune Type
Australia
ATV + DTV
Installation Guide
Please set the following options,then
Press OK button to begin auto tuning.
Channel Tuning
TV : 3 Programme(s)
DTV : 0 Programme(s)
Radio : 0 Programme(s)
MENU
Skip
EXIT
Quit
25 % 471.25 MHZ (TV)
- - - - - - - - - - -