12
OPERATING YOUR WINE CHILLER
It is recommended you install the Wine Chiller in a place where the ambient temperature is between
23º-26ºC/ 72º-78ºF. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 5
º-18ºC
/40º-65ºF may not be
reached.
Recommended Temperatures for Chilling Wine
.
Red Wines
15º - 18º C
58 – 65º F
Dry/White Wines
9º - 14º C
48 – 57º F
Rose Wines
10º - 11º C
49 – 51º F
Sparkling Wines
5º - 8º C
40 – 47º F
ON/OFF POWER
To turn OFF the appliance, touch the
mark and hold for 2 seconds.
CONTROL PANEL LOCK.
•
Your Wine chiller is equipped with an automatic Control panel lock function. This
function will prevent any unwanted changes to your temperature or power settings.
•
The lock function will activate automatically 12 seconds after the last time a button is
pushed on the control panel.
•
To unlock the control panel lock press and hold the
and the
buttons for 3 seconds
the control panel will beep and blink once indicating that the control panel is active and the
settings can be changed.
SETTING THE TEMPERATURE CONTROL
•
You can set the temperature as you desire by touching the
or
mark. When you touch the
two marks for the first time, the LED readout will show the original temperature set at previous
time (the temperature preset at the factory is 12ºC/54ºF).
•
The temperature that you desire to set will increase 1ºF or 1ºC if you touch the
mark once, on
the contrary the temperature will decrease 1ºF or 1ºC if you touch the
mark once.
•
When you store mostly red wines, the temperature which you control by touching the above two
marks need to be set at between 15º - 18ºC/58º - 65
°
F and the LED lamp under “RED” will be lit
red.
•
When you store mostly white wines, the temperature needs to be set at between 9º - 14ºC/48º -
57
°
F and the LED lamp under “WHITE” will be lit green.
•
When you store mostly sparkling wines, the temperature needs to be set at between 5º - 8ºC/40º -
47
°
F and the LED lamp under “SPARKL” will be lit amber.
•
The temperature inside the unit will be appeared in blue color in the display window.
You can select temperature display setting from Fahrenheit to Celsius degree by touching the
ºF/ºC
mark. Fahrenheit or Celsius degrees indicator will appear in green color in the temperature display
window.
