Award CS1-903S, Instruction Manual

11 

CARBON FILTER-not supplied 

Activated carbon filter can be used to trap odors. Normally the activated carbon filter 
should be changed every 3 to 6 months according to your cooking habits. The 
installation procedure of activated carbon filter is as below: 
 
1.  Before installing or replacing the carbon filters, disconnect the mains power to the 

unit. 

2.  Press the filter lock and remove the mesh filter.  
3.  Turn the carbon filter on both sides of the motor anti-clockwise. Replace the 

carbon filters with the new carbon filters. 

4.  Place the mesh filter. 
5.  Connect the power supply to the wall socket. 

 
 
 
 
 
 
 
NOTE:  



  Make sure the filter is securely locked. Otherwise, it would loosen and cause 

danger

.



  When activated carbon filter attached, the suction power will be lowered.  

 
BULB REPLACEMENT 

Important : 



  The bulb must be replaced by the manufacturer, its 

service agent or similarly qualified persons. 



 Always switch off the electricity supply before 

carrying out any operations on the range hood. 
When handling bulb, make sure it has completely 
cooled down before any direct contact with hands. 



  When handling bulbs hold with a cloth or gloves to 

ensure perspiration does not come in contact with 
the bulb as this can reduce the life of the bulb. 

 
Note: 



  Before changing the lights, make sure that the range hood is turned off and 

unplugged. 



  Protect against danger when changing lights, by wearing gloves.