EN
1
11
Activated Charcoal Filter (Recirculation Version)
It cannot be washed or regenerated, and must be changed when the
FC
symbol on the display
appears, or at least once every 4 months. The Alarm signal, if it has been activated, only
appears when the Suction motor is turned on.
Activating the alarm signal
• In Recirculation Version Hoods, the Filter Saturation Alarm must be activated on
installation or at a later date.
• Turn the Lights and the Suction Motor off.
• Press
D
and
hold for
approximately 5 Seconds
:
• The message
FC+Dot
flashes twice, A.C. Filter saturation alarm
ACTIVATED
• The message
FC+Dot
flashes once, A.C. Filter saturation alarm
DEACTIVATED
CHANGING THE ACTIVATED CHARCOAL FILTER
Resetting the alarm signal
• Turn the Lights and the Suction motor off, then disable the 24h
function, if enabled.
• Press button
E
(see the paragraph on Use).
Changing the Filter
• Remove the Metal grease filters.
• Remove the saturated charcoal filter by releasing the fixing
hooks.
• Fit the new filter and fasten it in its correct position.
• Replace the Metal grease filters.
A
B
Lighting unit
•
For replacement contact an authorised Award service centre.
