Award TDHP8, User Manual

EN - 17

5.2.1. 

Auxiliary Functions

The table that summarises the options that can be selected in programmes is given below.

Option

Description

Drying Level

The humidity level obtained after drying can be increased by 3 levels. This way, 

level of required dryness can be selected. The levels that can be selected other 

than the standard setting: 1, 2, 3. After selection, the LED of the relevant drying 

level will turn on. 

Anti-Crease

If you select the "Anti-Crease" option and do not open the door of the dryer at the 

end of the programme, the 1-hour anti-crease phase will extend to 2 hours. After 

selecting the Anti Crease option, you will hear an audible warning. You can press 

the same button again to cancel the option. If you open the door or press the Start/

Pause key while the anti-crease step is in progress, the said step will be cancelled.

Delay Start

You can delay the start time of the programme by selecting the 1-hour to 23-hour 

option. You can activate the desired delay time by pressing the Start/Pause button. 

When the time is up, the selected programme will start automatically. During the 

delay time, options compatible with the programme can be activated/deactivated. 

Long pressing on Delayed Start button changes delay time continuously.

Buzzer Cancel

The dryer gives an audible warning when programme selection knob is turned, 

buttons are pressed and at the end of programme. To cancel the warnings, press 

and hold the "Anti-Crease Option" button for 3 seconds. When you press the 

button, you will hear an audible warning that the option has been cancelled.

Time Drying

When knob is positioned to Time Drying programme, option can be selected by 

pressing Time Drying option button and program starts by pressing Start/Pause 

button. Long pressing on tme dyring button changes time continuously.

Child Lock

There is a child lock option to avoid changes in the programme flow when keys 

are pressed during the programme. To activate the child lock, press and hold 

the "Delay Start" and "Anti-Crease" keys simultaneously for 3 seconds. When 

the child lock is active, all keys will be deactivated. Child lock will be deactivated 

automatically at the end of the programme. When activating/deactivating the child 

lock, ‘‘CL’’ will visualize on display for 2 sec and then becomes off; and an audible 

warning will be heard. Warning; when the dryer is running or the child lock is 

active, if you turn the programme selection knob, you will hear an audible warning 

and ‘‘CL’’ will visualize on display for 2 sec and then becomes off. Even if you set 

the programme knob to another programme, the previous programme will continue 

running. To select a new programme, you need to deactivate the child lock and 

then set the programme selection knob to ‘‘Off’’ position. Then, you can select and 

start the desired programme.