Ý
ØßÐÌÛÎ
ì
| System Settings
System Log
36
Í
ÇÍÌÛÓ
Ô
ÑÙ
The RG300 supports a logging process that controls error messages saved
to memory. The logged messages serve as a valuable tool for isolating
device and network problems. The System Log page displays the latest
messages logged in chronological order, from the oldest to the newest. Log
messages saved in the unit
s memory are erased when the device is
rebooted.
Figure 21: System Log
The following items are displayed on this page:
Refresh
Sends a request to add the latest entries to the System Log
Table.
Download
Downloads the current system log messages to a file on
the web management station.
Clean
Removes all the current system log messages from the
System Log Table.
System Log
Level
Sets the minimum severity level for event
logging. The system allows you to limit the messages that are logged
by specifying a minimum severity level. Error message levels range
from the most severe (Emergency) to least severe (Debug). The
message levels that are logged include the specified minimum level up
to the Emergency level.
Max Size
The maximum memory size to be used for log messages
on the Gateway. (Range: 1-512 KB)
Set
Click to set the Max Size and System Log Level values.