Ý
ØßÐÌÛÎ
ïï
| VoIP Settings
Speed Dial
67
FAX
Selects the method to use when sending fax messages over the
VoIP network from a fax machine connected to one of the RJ-11 Phone
ports on the Gateway.
FAX T.38
The SIP protocol sets up the VoIP call, then the T.38
Fax Relay protocol sends the fax data over the network.
FAX Pass-Through
Enables voice calls and faxes to be sent
from the Phone port connection. For this option, fax signals are sent
over the VoIP network using the voice codec, just as if it were a
voice call.
Session Timer Enable
Enables a limit on the duration of VoIP calls.
Session Timer Interval
Sets the maximum time limit for VoIP calls.
Í
ÐÛÛÜ
Ü
×ßÔ
The Speed Dial page allows you to configure up to eight VoIP numbers that
are immediately dialed when a user enters the Speed Dial Key sequence
(as defined on the Dial Plan page) followed by a speed dial number.
Figure 47: Speed Dial
