5.2
Battery and Charger
Do charge the battery to capacity in 8 -12 hours for first time. Please use the battery and
charger provided by the manufacturer. This unit adopts built-in Li-ion battery, and full
battery can standby 80 hours. After first use, the battery usually should be charged fully in 5--
8 hours.
Note:
a:
For it’s Li-ion battery, which contains harmful chemicals and may burst, please don’t
bump, puncture it violently and keep it off fire.
b:
Please charge the battery in time to keep it working normally.
5.3
Startup
Put the SIM card and battery in place.
Turn on the unit outdoors by pressing the “on/off” button until the indicator is on.
For first use, please initialize the unit and restore it to default setting. (Please refer to 5.4
for
instruction.)
In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS
signals. The indicator will keep flashing every 3 seconds when the unit has received the signals.
When this unit receives GPS signals normally, you can use it and do any setting as the instructions of
this manual.
5.4
LED Indicator
LED
Indicator
Status
Meaning
Green
GSM working status
flashing
GSM / GPRS signal fine
on
No GSM signal
off
Device fault or dormant
Blue
GPS working status
flashing
GPS signal fine
on
No GPS signal
off
Device fault or dormant
Red
Battery/Charging
flashing
Low battery
on
Charging
off
Full battery or charged full
5.5
SMS Text
Google link---
click link, there is map when positioning ok, no map
means no positioning.
V:A ---
GPS signal ok.
V:V---
no GPS signal
2013-08-30 20:54:15---
the last time receive GPS signal.
Spd:000km/h---
the speed of tracker ran.
Bat:6---
battery balance
（
the range is from 1 to 9
）
ID:4102000759---
IMEI of device(used for connect tracking website or
APP)
S19G04;plmn:46001---
GSM operator data
Lac:9516,cellid:23596---
LBS data
Summary of Contents for AV12G
Page 6: ...7 Command list ...
