49
10.4.3
Network Setup
1)
Click on “Network Setup” option, it will show the network setting items,
< IP Setup>
♦
You can select “obtain IP address automatically” or “Use the following IP
address” to enter the IP address.
The default setting is as following:
♦
IP Address: 192.168.100.10.
♦
Subnet Mask: 255.255.255.0
♦
Default Gateway: 192.168.100.10
♦
DNS Server: 192.168.100.10
<DHCP Server Setup>
<Note: Auto-Configuration Network Setup on WPS>
♦
The default setting of the WPS box as DHCP server. When the WPS box is
connected to a LAN that already has a DHCP server, the WPS box uses an IP
address assigned by the server. When the WPS box is connected to a LAN
that does not have a DHCP server, the WPS box becomes the DHCP server
in the network.
♦
You can select “auto” option. WPS will auto disable the DHCP server setup
when the existing DHCP server is detected. Or you can simply select
“Disable” option. When you choose “Auto” option, you can enter the below
information or keep it as default setting.
