Awntech CH21 Owner'S Manual & Installation Instructions Download

Page: 7 / 7

STEP 7:

Pull the remainder of fabric over the fame with the valance hanging down below the

(NC) and (FB) bars.

Frame 2’-4’

Frame 5’-7’

STEP 7:

Once you are satisfied with the position of the cover, Pull the tabs snugly and attach them to the

pre-installed Velcro tape on the bars.

Summary of Contents for CH21

Page 3: ... first Mount Provided Z Brackets to surface and insert TB into brackets There are no pre drilled holes for the Z Bracket You ll use self tapping screws to secure them wherever you like The C Channel must be close to the wall Before installing the TB you must make sure that there is enough space below to install AA Please see the chart below for the height measurements ...

Page 4: ...e between the top of the TB and the bottom of the AA is indicated below all the sizes are in inches Model Space between TB and SA in inches Height incl valance Projection CH22 24 24 24 CH32 36 36 24 CH33 36 36 36 CH21 12 18 12 ECH1836 18 18 36 ECH23 24 24 36 ...

Page 6: ...6 The Frame for Charleston is complete Frame 2 4 Frame 5 7 INSTALLING THE COVER STEP 6 Slide the tubing at the top of the fabric cover into the C Channel on the top of TB ...

Page 7: ...ric over the fame with the valance hanging down below the NC and FB bars Frame 2 4 Frame 5 7 STEP 7 Once you are satisfied with the position of the cover Pull the tabs snugly and attach them to the pre installed Velcro tape on the bars ...