The Dallas Retro
®
Style Awning
Important Installation Information:
The Dallas Retro Frame must be installed on the wall as there is
no connecting part between BP and TB
ASSEMBLY AND INSTALLATION INSTRUCTIONS
CAUTION: When you are opening the box keep children away. This
awning frame contains sharp metal and small hardware parts.
Choking hazard: Keep parts away from children. They may choke on
hardware. Be extremely cautious around children.
Models with Valance:
RR22, ER23, CR32, CR34, CR43, CR44, ER2442, ER12, ER1836, ER1230, ER1030, ER24,
CR33
Models without Valance:
RR22-NV, ER23-NV, CR32-NV, CR34-NV, CR43-NV, CR44-NV, ER2442-NV, ER12-NV, ER1836-
NV, ER1230-NV, ER1030-NV, ER24-NV, CR33-NV
All the awning sizes over 9’ wide come in two sections. Example: Top Bar (TB) consists of
TB1 & TB2 and Front Bar (FB) consists of FB1 & FB2
See the chart below for the width of the awning:
Awning Size
Width in inches
Awning Size
Width in inches
3 40.5 12
148.5
4 52.5 13
160.5
5 64.5 14
172.5
6 76.5 15
184.5
7 88.5 16
196.5
8 100.5 17
208.5
9 112.5 18
220.5
10 124.5 19 232.5
11 136.5 20 244.5
OUR AWNINGS ARE DESIGNED 4.5” WIDER THAN STANDARD
WINDOW/DOOR OPENINGS SO THAT YOU WILL BE ANCHORING INTO
THE STUDS AROUND THE WINDOW OR DOOR. EXAMPLE: RR22-5 is for a
5’-0” wide window. It measures 64.5” wide, 31” tall (24” plus 7” valance) and 24”
deep (projection).
Summary of Contents for Dallas Retro CR32
Page 6: ...DALLAS RETRO STYLE AWNINGS MUST BE ASSEMBLED ON THE BUILDING For frames sizes 2 4 ...
Page 7: ......
Page 9: ......
