background image

STEP 10: Once you are satisfied with the position of the cover on the frame, wrap the 
Velcro strips on the fabric tabs around the exterior bars.  Pull the tabs snugly and attach 
them to the pre-installed Velcro tape on the bars. 

 

WARRANTY 

5-Year Limited Manufacturer's Warranty 

A. WHO GIVES THIS WARRANTY?

  

Awntech Corporation 

B. WHO IS ENTITLED TO THIS WARRANTY? 

This Warranty applies only to the original purchaser who paid for the product and may not be assigned or 
transferred to subsequent owners. This Warranty applies only to products purchased and installed in the US.

 

C. WHAT ARE THE RESPONSIBILITIES OF AWNTECH CORPORATION UNDER THIS WARRANTY? 

Subject to the terms and conditions set forth herein, Awntech Corporation will furnish replacements for parts 
found by Awntech Corporation to be defective in design, manufacture or assembly, under each specific 
component or product warranty as set forth below.

 

D. WHAT ARE THE RESPONSIBILITIES OF THE ORIGINAL PURCHASER UNDER THE WARRANTY? 

1.

 

Before any claims may be made under this Warranty, the original purchaser must have paid in full for 
the product covered under the Warranty, according to the terms and conditions of the pay-plan defined 
in the original order. IF THE PURCHASER HAS FAILED TO MAKE FULL PAYMENT, THIS 
WARRANTY SHALL BE NULLIFIED AND AWNTECH CORPORATION SHALL BE RELIEVED FROM 
ANY RESPONSIBILITY OR LIABILITY UNDER THIS WARRANTY. The purchaser agrees and 
acknowledges that this Warranty agreement constitutes an executor contract. 

2.

 

The purchaser must use care in installation, maintenance, operation, use, and storage of the product in 
accordance with the instructions contained in the owner’s manual. ANY FAILURE TO INSTALL, 
MAINTAIN, OPERATE, USE AND STORE THE PRODUCT IN ACCORDANCE WITH THE 
INSTRUCTIONS CONTAINED IN THE OWNER’S MANUAL WILL NULLIFY THIS WARRANTY AND 
RELIEVE AWNTECH CORPORATION FROM ANY RESPONSIBILITY OR LIABILITY UNDER THIS 
WARRANTY. 

3.

 

Promptly notify Awntech Corporation of any claims (within 10 days of purchase). 

4.

 

The purchaser may be required to provide a photograph of any defective parts. The purchaser may also 
be required to pay a deposit until the defective parts are returned to Awntech Corporation for inspection. 
The purchaser must obtain a return authorization form from Awntech Corporation’s customer service 
department prior to the return of any merchandise and after having received such authorization, return 
the part or product, freight prepaid, to Awntech Corporation. 

E. WHAT IS COVERED UNDER THIS WARRANTY? 

1. All the frame parts and components and the fabric is covered under warranty for manufacturing defects 
only: 

(a) Should the purchaser promptly notify Awntech Corporation of such defects within one year (12 
months) from the date of the original purchase, the defective component will be replaced at no 
charge. Awntech reserves the right to ask for the defective part to be returned and/or photos of the 
defective part. 
(b) After one year but within five years (60 months) from the date of the original purchase, a 
defective component will be replaced upon the purchaser's payment of 1/60

th

 of the full retail cost of 

the component for each month of use prior to the claim. 

    

 

F. GENERAL PROVISIONS AND LIMITATIONS 

1.  THE WARRANTY GRANTED HEREIN IS THE EXCLUSIVE REMEDY FOR THE PURCHASER. 

AWNTECH CORPORATION MAKES NO OTHER WARRANTIES TO THE PURCHASER, EXPRESS, 
STATUTORY, IMPLIED OR OTHERWISE AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT 
LIMITATIONS, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE, ARE HEREBY DISCLAIMED. 

2.  TO THE EXTENT PERMITTED BY LAW, AWNTECH CORPORATION SHALL HAVE NO LIABILITY 

TO THE PURCHASER OR ANY OTHER PERSON FOR INCIDENTAL, SPECIAL, CONSEQUENTIAL, 
INDIRECT OR SIMILAR DAMAGES OF ANY KIND OR NATURE WHATSOEVER, WHETHER 
ARISING OUT OF BREACH OF WARRANTY OR OTHER BREACH OF CONTRACT, NEGLIGENCE 
OR OTHER TORT, OR OTHERWISE, EVEN IF AWNTECH CORPORATION SHALL HAVE BEEN

 

ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF SUCH POTENTIAL LOSS OR DAMAGE. IN 
NO EVENT SHALL AWNTECH CORPORATION BE LIABLE FOR LOSS OF PROFITS AND/OR 
WAGES. 

3.  SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, 

OR DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. 

4.  THIS WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY HAVE OTHER RIGHTS, WHICH 

VARY FROM STATE TO STATE. 

Summary of Contents for Dallas Retro CR32










Reviews: