2
CONCRETE BLOCK WALLS:
3/8” x 3” Masonry anchor bolts or Tapcon Screws plus Washers (1 per bracket)
WOOD OR SIDING:
3/8” x 3” Lag Screws plus Washers (1 per bracket)
OTHER STRUCTURES:
CONSULT A PROFESSIONAL
Other parts: Z-Brackets, Self-tapping Screws
PARTS:
Awning Size in Ft.
3-4
5
6-7
8-10
11-12
13-18
Custom
(TB) Top Bar – C Channel
1
1
2
2
3
3
(FB) Front Bar
1
1
2
2
3
3
(NC) Hypotenuse/Cover Support
2
3
3
5
4
7
(SBP) Santa Fe & Black Projection
Bar
2
1
1
3
2
5
Other parts: Z-Brackets, Self-tapping Screws
All awning sizes over 6’ wide come in multiple sections. Example: 6’ size Top Bar (TB) consists of TB1 & TB2 and
Front Bar (FB) consist of FB1 & FB2
Tools Required:
Electric Impact Drill, Installation Anchors (as per your wall type), Tape Measure, Safety Glasses, 4’
Level, a Safe Ladder and #2 pencils.
YOU MAY ALSO NEED AN ASSISTANT FOR LARGER AWNINGS. IT DEPENDS ON THE SIZE AND WEIGHT OF THE
AWNING.
NOTE: YOU WILL FIND THAT THE FITTINGS HAVE BEEN PRE-INSTALLED, AS WE HAVE PRE-ASSEMBLED AND
INSPECTED IT FOR YOU IN THE FACTORY.
The Santa Fe frame must be installed on the wall as there is no connecting part between Projection Bar (PB) and
Top Bar (TB)
STEP 1:
Separate all of the parts, so they will be easy to assemble. Please refer to Parts chart for quantities for each
part. (pg. 2)
