Awoco RH-SP08 Installation Manual & User Manual Download

Page: 3 / 17

1. KNOW BEFORE INSTALLATION

Research, plan and prepare the optional accessories & tools.

Duct venting and accessories (NOT INCLUDED)

•

If for new installation or your old range hood doesn’t have exhaust duct, prepare

to cut the openings through the bottom of the cabinet, wall, or top cabinet to

ceiling. The 8” round ducts are NOT included (Recommend to purchase 8”

semi-rigid aluminum ducts). Refer to Section 5

VENTING METHODS

for

detail.

•

Check the existing exhaust duct size. If not 8” round metal duct, try to

get the converter / reducer / adapter / elbow as shown in the pictures.

•

The air damper is NOT included.

•

Also prepare the cutting tools (jig saw or reciprocating saw), screw drivers or power drill, level,

measuring tape, knife, duct/foil tape, screws, marker/pencil, etc.

•

2 people are required for the installation.

Summary of Contents for RH-SP08


















Search results

Summary of Contents for RH-SP08

Reviews:

Related manuals for RH-SP08

Brands by name

Popular brands

Awoco RH-SP08, Installation Manual & User Manual

Search results

Summary of Contents for RH-SP08

Reviews:

Related manuals for RH-SP08

Brands by name

Popular brands