LIGHT BULB
This range hood may require two halogen bulbs (Type JCD, 12V, 20W Max, G-4
Base)
WARNING:
Always switch off the electrical supply before carrying out any operation
on the appliance.
To change bulbs:
1. Remove the halogen bulb cover
②
by using the flat screw driver.
2. Remove the bulb by pulling sideward (DO NOT ROTATE).
3. Replace with Type JCD, 12V, 20W Max, G-4 Base halogen bulb. Do not touch
replacement bulb with bare hands!
CAUTION:
1. THE SURFACE, THE COVER OF THE HALOGEN BULBS MAY BE HOT.
CAUTION WHEN TAKING THE REPLACEMENT.
2. BULBS MAY BE HOT. CAUTION WHEN TAKING THE REPLACEMENT.
OPERATION
The hood is operated using a push button switch on the front panel.
1 – ON/OFF SWITCH
2 – LOW SPEED SWITCH
3 – MEDIUM SPEED SWITCH
4 – HIGH SPEED SWITCH
5 – LIGHT SWITCH
6 – CLEAR INDICATOR (Not applied to this model)
7 – WATER AUTO-CLEAN SWITCH (Not applied to this model)
1 2 3 4 5 6 7
