AWS Storage Gateway User Guide
Performing Tasks on the VM Local Console (File Gateway)
After your gateway restarts, reconfigure the adapter you just added to make sure that network
connectivity to the internet is established.
To configure the adapter for the network
1. In the VSphere client, choose the
Console
tab to start the local console. Use the default login
credentials to log in to the gateway's local console for this configuration task. For information
about how to log in using the default credentials, see
Logging In to the File Gateway Local
2. At the prompt, enter
2
to select
Network Configuration
, and then press
Enter
to open the network
configuration menu.
3. At the prompt, enter
4
to select
Reset all to DHCP
, and then enter
y
(for yes) at the prompt to set
all adapters to use Dynamic Host Configuration Protocol (DHCP). All available adapters are set to use
DHCP.
API Version 2013-06-30
242