AWS Storage Gateway User Manual Download

Page: 377 / 438

AWS Storage Gateway User Guide

Connecting to VTL Devices

6. Select the ﬁrst device and choose

Connect

. You connect the devices one at a time.

7. In the

Connect to Target

dialog box, choose

8. Repeat steps 6 and 7 for each of the devices to connect all of them, and then choose

in the

iSCSI

Initiator Properties

dialog box.

On a Windows client, the driver provider for the tape drive must be Microsoft. Use the following

procedure to verify the driver provider, and update the driver and provider if necessary.

To verify the driver provider and if necessary update the provider and driver on a Windows

client

1. On your Windows client, start Device Manager.
2. Expand

Tape drives

, choose the context (right-click) menu for a tape drive, and choose

Properties

3. In the

Driver

tab of the

Device Properties

dialog box, verify

Driver Provider

is Microsoft.

API Version 2013-06-30

370

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands