AWS Storage Gateway User Manual Download

Page: 78 / 438

AWS Storage Gateway User Guide

Backing Up Your Volumes

We highly recommend that you create one or more upload buﬀer alarms in the Amazon CloudWatch

console. For example, you can set an alarm for a level of use you want to be warned about and

an alarm for a level of use that, if exceeded, is cause for action. The action might be adding more

upload buﬀer space. For more information, see

To set an upper threshold alarm for a gateway's

upload buﬀer (p. 197)

Cleaning Up Resources You Don't Need

If you created your gateway as an example exercise or a test, consider cleaning up to avoid incurring

unexpected or unnecessary charges.

To clean up resources you don't need

1. Delete any snapshots. For instructions, see

Deleting a Snapshot (p. 163)

2. Unless you plan to continue using the gateway, delete it. For more information, see

Deleting Your

Gateway by Using the AWS Storage Gateway Console and Removing Associated Resources (p. 281)

3. Delete the AWS Storage Gateway VM from your on-premises host. If you created your gateway on an

Amazon EC2 instance, terminate the instance.

Backing Up Your Volumes

By using AWS Storage Gateway, you can help protect your on-premises business applications that use

Storage Gateway volumes for cloud-backed storage. You can back up your on-premises AWS Storage

Gateway volumes using the native snapshot scheduler in Storage Gateway or AWS Backup. In both cases,

Storage Gateway volume backups are stored as Amazon EBS snapshots in AWS.

Topics

•

Using Storage Gateway to Back Up Your Volumes (p. 71)

•

Using AWS Backup to Back Up Your Volumes (p. 71)

Using Storage Gateway to Back Up Your Volumes

You can use the Storage Gateway Management Console to back up your volumes by taking Amazon EBS

snapshots and storing the snapshots in AWS. You can either take an ad hoc (one-time) snapshot or set up

a snapshot schedule that is managed by Storage Gateway. You can later restore the snapshot to a new

volume by using the Storage Gateway console. For information about how to back up and manage your

backup from the Storage Gateway, see the following topics:

•

Testing Your Gateway (p. 68)

•

Creating a One-Time Snapshot (p. 162)

•

Cloning a Volume (p. 157)

Using AWS Backup to Back Up Your Volumes

AWS Backup is a centralized backup service that makes it easy and cost-eﬀective for you to back up your

application data across AWS services in both the AWS Cloud and on-premises. Doing this helps you meet

your business and regulatory backup compliance requirements. AWS Backup makes protecting your AWS

storage volumes, databases, and ﬁle systems simple by providing a central place where you can do the

following:

• Conﬁgure and audit the AWS resources that you want to back up.

API Version 2013-06-30

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands