AWS Storage Gateway User Manual Download

Page: 36 / 438

AWS Storage Gateway User Guide

Activate Your Hardware Appliance

3. For

Subnet

, enter a valid subnet mask, and then press

Down arrow

4. For

Gateway

, enter your network gateway’s IPv4 address, and then press

Down arrow

5. For

DNS1

, enter the IPv4 address for your Domain Name Service (DNS) server, and then press

Down

arrow

6. (Optional) For

DNS2

, enter a second IPv4 address, and then press

Down arrow

. A second DNS server

assignment would provide additional redundancy should the ﬁrst DNS server become unavailable.

7. Choose

Save

and then press

Enter

to save your static IPv4 address setting for the appliance.

To log out of the hardware console

1. Choose

Back

to return to the Main screen.

2. Choose

Logout

to return to the Login screen.

Next Step

Activate Your Hardware Appliance (p. 29)

Activate Your Hardware Appliance

After conﬁguring your IP address, you enter this IP address in the console on the

Hardware

page, as

described following. The activation process validates that your hardware appliance has the appropriate

security credentials and registers the appliance to your AWS account.

AWS Storage Gateway Hardware Appliance is only available in the US and Europe. You can choose to

activate your hardware appliance in any of the supported AWS Regions. For the supported AWS Regions,

see

AWS Storage Gateway Hardware Appliance Regions

in the

AWS General Reference

To activate your appliance for the ﬁrst time or in an AWS Region where you have no

gateways deployed

1. Sign in to the AWS Management Console and open the AWS Storage Gateway console at

https://

console.amazonaws.cn/storagegateway/home

with the account credentials to use to activate your

hardware.

API Version 2013-06-30

Summary of Contents for Storage Gateway























































































































































































































































































































































































































































Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands

AWS Storage Gateway, User Manual

Search results

Summary of Contents for Storage Gateway

Reviews:

Related manuals for Storage Gateway

Brands by name

Popular brands