background image

7. Headless Mode and One Key Return

6. Controls and Fine Tuning

Turning

Forward/

Backward

Forward/

Backward

Fine Tuning

Side-Flying

Side-Flying

Fine Tuning

Headless Mode: Press the Headless Mode button and you will hear the controller begin to beep, indicating it has 

entered Headless Mode. No matter what direction the quadcopter faces, it will respond according to the direction 

pushed on the remote. (Forward on the remote will make the quadcopter fly forward.) This makes flying simpler 

and more convenient for beginner pilots. To exit Headless Mode, press the button again and you return to Normal 

Mode. 

When the Quadcopter deviates too much, the player can re-adjust the balance to improve the Quadcopter’s 

flight. Place the Quadcopter on the level floor, then slightly press the 360 flips button on the remote controller’s 

upper-right side. Simultaneously push the two operation levers to the bottom-left and hold for 3 seconds. Release 

the operation levers after the indication light of the Quadcopter begins flashing. Wait about 2 seconds until the 

indication light turns constant and the balance re-adjustment is finished.

One Key Return: As long as you are in controllable range, press the One Key Return button on the remote. You 

will hear a single beep and the quadcopter will automatically return to the pilot. Press the button again or push 

the control lever to exit One Key Return. 

This Quadcopter has been specially designed to prevent it from crashing into an insecure or dangerous area due 

to low battery power. When the battery power begins to become insufficient, the indicator light will turn from 

constant to flashing. The pilot will have enough time to fly the Quadcopter back and change the battery or 

recharge it for the next flight.  

Ascending/

Descending

Move the left operating lever up and down to make 

the Quadcopter ascend and descend. 

When the Quadcopter is hovering, and it deviates 

forward or backward, turn the forward/backward fine 

tuning up or down until the Quadcopter hovers 

balanced.

When the Quadcopter is hovering, and it deviates left 

or right, turn the side-flying fine tuning to the left or 

right until the Quadcopter hovers balanced.

Move the right operating lever left and right to make 

the Quadcopter fly left and fly right. 

Move the right operating lever up and down to make 

the Quadcopter fly forward and fly backward. 

Move the left operating lever left and right to make 

the Quadcopter turn left and turn right. 

Reviews: